Request A Quote

Dual Hydraulic Test System

About

The SS Drip Tray is provided to keep the Test Component. Electrical Power Points are provided for actuating Test Component Solenoids. Both Digital Measurements as well as Manual measurements are provided. Three ROTAMETERS can be seen on the PANEL. The Hydraulic Power Pack is kept behind the USER PANEL; it may be kept behind a wall to reduce the Noise Level.
Application – Control (USER) Panel of Component Test Rig for Flow/Cycling/ Pressure Test/ Flushing Application.

Image Gallery

Technical Details

ITEMSPECIFICATION
Measuring JarCapacity:- 0-3 liter, Resolution:-25 ml
Dial Indicator (+-) 0.5 mm to (+-)100 mm L.C.- 1 micron
Stop Watch 0-10 minute, L.C.= 1 millisecond
Megger/ Insulaton Testor Insulation tester for mesurement at 510 VDC for 1 minute. Range upto 999 M ohm. Display analog or 3 digital battery or generator operated.
Dielectric Strength Tester Dielectric strength tester for measurement at 500 VDC for 30 Sec.Measuring Range- 999 micro Ampere
multimeter Digital Multimeter 4 Digit, resistance range 99 ohm, resolution 99.99 ohms
Linear Scale/ Vernier Range:- 0-150 mm, Least Count- 5 micon
torque Wrentch Torque upto- 30Kgf-cm with socket for M16 hexagonal nut

  • Electrical Power Points are provided for actuating Test Component Solenoids. Both Digital Measurements as well as Manual measurements are provided. Three ROTAMETERS can be seen on the PANEL. The Hydraulic Power Pack is kept behind the USER PANEL; it may be kept behind a wall to reduce the Noise Level.

Key Features

  • Oxygen booster can Boost pressure up to 5000 PSI (345 Bars). The minimum inlet pressure (reject pressure) in inlet cylinders is 35 (+/-2) Bars.
  • The inlet section comprises of 5 micron High pressure filter to insure the inlet Gas purity.
  • One Stand By Oxygen Booster provided. Only one to be operated at a time.

Download Gallery

Datasheet Product Catalog

Engineering Design Documents

PPT Gallery

-->

Video Gallery

Social Media

Our Products

×
Chat With Us
×