Hydraulic Flushing Rig for Nigeria

About

Flushing is a process which is done to clear any contaminants present in the pipe and oil after installation. The sole purpose of this process is to avoid damage caused by contaminants /dirt’s to the end using equipment. The pipes are cleaned by creating a turbulent flow in the system and passing them through filters until the desired cleanliness value is obtained. The cleanliness in the pipe is measured in terms of NAS/ISO/SAE Values. Process Flushing involves continuous recirculation of the working fluid in the system and purification at the flushing filter until the cleanliness value is obtained.

Image Gallery

Technical Details

  • Dimension (L,W,H) in mm : 1500/1100/1400
  • Weight : 1100 Kg
  • Working Fluid : Hydraulic Oil
  • Tank Volume : 300 liters
  • Cleanliness level of Oil : NAS 6
  • Pressure Adjustment Range of working fluid in pressure line : Up to 350 Kgf/cm2
  • Max. Pressure of working fluid : 350 Kgf/cm
  • Temperature Range of working fluid : MAX. 60°C
  • Capacity of Pumping station of Rig : MAX. 58 LPM
  • Electric Power supply requirement : 3Ø Power supply, 37.5kW, 50Hz
  • Flushing units are used to clean hydraulic systems.
  • By flushing a new hydraulic system before bringing it into operation, expensive breakdowns are avoided.
  • Flushing system creates a high flow combined with high pressure, which in turn creates a turbulent flow in your hydraulic lines that eliminates contamination.

Key Features

  • Cleanliness verification to the appropriate standard.
  • All mild steel construction/Stainless steel construction on demand.
  • All pipes/fittings-SS304.
  • Wide range of pressure and flow combinations.
  • Suitable for water and oil based fluids.
  • Booster pump based close loop filtration and cooling circuit.
  • Water cooling/Air cooling options.

Download Gallery

Datasheet Product Catalog

Engineering Design Documents

PPT Gallery

Video Gallery

Social Media

Our Products

Chat With Us