Nitrogen Generation Charging And Distribution Vehicle-UGSSN2

About

Nitrogen Generating Storage and Distribution System-UGSSN2 is used as Nitrogen charger for charging the Nitrogen bottles of the SU-30MKI aircraft. The Nitrogen Generating Storage and Distribution System (UGSS N2) is used for generation of nitrogen and charging Nitrogen Cylinders. This system can charge the Nitrogen bottles with compressed Nitrogen Gas up to a pressure of 350 Kg/cm². There shall be following major sub systems of UGSSN2 namely:

Trailer mounted Nitrogen Generation System.

Trailer mounted High pressure Nitrogen Storage

Mobile Nitrogen transportation carts.

Ground Power Unit (GPU).

Image Gallery

Technical Details

Specifications

Operation: Outdoor
Temperature: -20 Degree to +55 degree C
Relative Humidity: Up to 100%
Wind Velocity: 100km/Hr.
Altitude: 3500 m above sea level
Rain: form light drizzling to heavy rain
Salt fog: Suitable for operation under seal Water condition

Applications

Nitrogen Generating Storage and Distribution System-UGSSN2: Suitable for industries like aerospace, electronics, food processing, medical equipment, metallurgy, and research facilities.

FAQ

Q1. What is the primary function of the UGSS N2 system?
Q2. What is the maximum pressure the system can achieve?
Q3. How does the system generate nitrogen gas?
Q4. What are the typical applications of the UGSS N2 system?
Q5. What is the purity level of the nitrogen produced by the UGSS N2?
Q6. What type of cylinders can the system charge?
Q7. What are the power requirements for the system?
Q8. Can the system operate in extreme environmental conditions?
Q9. Is the UGSS N2 system compliant with industry standards?
Q10. How is the system maintained?

Key Features

Nitrogen Generator: Often based on Pressure Swing Adsorption (PSA), membrane technology, or cryogenic distillation.
Compressor: High-pressure compressor to achieve the required 350 kg/cm².
Safety Valves and Gauges: To monitor and maintain safe operating conditions.

Storage Tanks: For intermediate storage of nitrogen gas before cylinder filling.
Control Panel: Automated control for system operation, pressure regulation, and safety features.
Nitrogen Generation: Produces high-purity nitrogen gas from atmospheric air or another nitrogen-rich source.

Details

The Nitrogen Generating Storage and Distribution System (UGSS N2) is an advanced setup designed for generating nitrogen gas and compressing it into storage cylinders for later use. This system can charge nitrogen cylinders with compressed nitrogen gas at high pressures, reaching up to 350 kg/cm².

Key Features

Nitrogen Generation: Produces high-purity nitrogen gas, suitable for a variety of industrial, medical, or scientific applications.

Cylinder Charging: Compresses and transfers nitrogen into storage cylinders, allowing easy transportation and usage.

High-Pressure Capability: The system supports compression of nitrogen gas to pressures as high as 350 kg/cm², making it ideal for high-demand scenarios.

Versatility: Useful in industries such as aerospace, food processing, manufacturing, and laboratories, where nitrogen is essential.

This system is typically equipped with specialized components like compressors, storage tanks, and control mechanisms to ensure safe and efficient operation.

Specifications

Parameter Details

Model Name UGSSN2

Operation: Outdoor

Temperature: -20 Degree to +55 degree C

Relative Humidity: Up to 100%

Wind Velocity: 100km/Hr.

Altitude: 3500 m above sea level

Rain: form light drizzling to heavy rain

Salt fog: Suitable for operation under seal Water condition

Flow rate (Nitrogen generation rate) : Suitable to Generate 400 (+/-5%) liters of Nitrogen in 10 hrs.

Nitrogen Purity: 99.5%

Pressure: 350 Bar

Dew point: -65 Degree C @150 Kg/cm2

Storage Capacity: 640 liters @ 350bar

Medium: Nitrogen

Booster type: Electrical /pneumatic

Power source: Engine or battery of the vehicle

Booster Ratio: 10: 1 min

Output pressure: 350 Bars

Reject pressure: 35 Bars

Inlet pressure Range: 0 to 350 bars

Nitrogen filtration (inlet) : 0.01Micron at the inlet with clogging indication filter element replaceable.

Nitrogen filtration (outlet): 0.01micron at the outlet with clogging indication .filter element replaceable.

High pressure Nitrogen storage: 16 cylinders of 40 liters each on a cascade. Divided & interconnection (in four sub sections) control valves on panel.