About

HYDRAULIC POWER PACK 230LPM/210 BAR: Hydraulic power pack shall cater for supply of Hydraulic oil to 6 (Six) No's of Servo hydraulic actuators (500kN range) working simultaneously in synchronization mode under load (up to 500 kN) at 210 bar pressure and at 200 - 230 l/min. it is a testing facility of servo hydraulic actuator in which we supply motor 110 kw & axial piston for creating 210 bar pressure and 200-230 LPM flow. A motor 11kw for a vane pump is used for cooling of oil up to 50 deg C. with Reservoir 1500 ltrs, as Per Technical Specification. A flow meter is used for measure the flow 200- 230 LPM with high pressure up to 210 bars. Accumulator is used to reserve the pressurized fluid i.e. hydraulic energy which is used due pressure drop in the system. Pressure relief cum unloading valve is used to loading & unloading of system. Due to loading of pressure and flow system will go with high temperature so Shell & tube type heat exchanger is used to maintain the temperature of hydraulic fluid with a vane pump with 390 LPM flow. For maintaining the NAS class different type of filters are used in main line pressure, return pressure & offline cooling system. This machine has two control systems one is main control panel & another is remote control panel.

Image Gallery

Technical Details

  • Ball Valve with Limit Switch: Full Bore Ball Valve with limit switch, working pressure upto 10 bar.
  • Cooling Line Pump: Fixed displacement Gear Pump / Screw pump. #Max. operating pressure: 5bar #Flow capacity: 850lpm at Max. Operating pressure #Operating speed: 1440rpm.
  • Anti Vibration Pads: Suitable for Above Motor.
  • Low pressure Line Filter Element: Suitable for above filter.
  • Shell and Tube Heat Exchanger: Water cooled oil cooler is required to cool the oil and shall meet following requirements. # Maximum oil temp.: 50 °C #Ambient temp. : 30 to 35 deg.
HYDRAULIC POWER PACK 230LPM/210 BAR: Hydraulic power pack shall cater for supply of Hydraulic oil to 6 (Six) No's of Servo hydraulic actuators (500kN range) working simultaneously in synchronization mode under load (up to 500 kN) at 210 bar pressure and at 200 - 230 l/min.it is a testing facility of servo hydraulic actuator in which we supply motor 110 kw & axial piston for creating 210 bar pressure and 200-230 LPM flow. A motor 11kw for a vane pump is used for cooling of oil up to 50 deg C. with Reservoir 1500 ltrs, as Per Technical Specification. A flow meter is used for measure the flow 200- 230 LPM with high pressure up to 210 bars.

Key Features

  • Hydraulic power pack
  • Hydraulic oil
  • Servo hydraulic actuators (500kN range)
  • flow meter 200- 230 LPM
  • Pressure relief valve
  • Tube Yype heat exchanger
  • cooling system

Download Gallery

Video Gallery

Social Media

Our Products

Chat With Us